Gas meter removal??

[macka09]

Hi all. How many of you honestly remove the meter when having to adapt pipework??

 

[kris]

just those with no eyebrows lol

 

[macka09]

Reason I ask is due to the company I work with don't unless it's right next to the meter.

 

[kirkgas]

Every time when soldering anywhere on the line, never when using compression

 

[Rickster123]

Every time when soldering anywhere on the line, never when using compression

Is the official UKPF line and we're sticking to it!

 

[macka09]

Why not if its a compression? I know source of ignition won't be there but tutor was saying its to do with allowing a larger amount of air into the pipework.

 

[GasmanxxxR1]

I remove it if I'm soldering within say 2 metres of it

 

[REDSAW]

never removed one when doing a cooker point unless its close to meter!

 

[lame plumber]

depends

 

[Sharp Point]

Only when soldering onto the union, well if the tail is held in the cradle via the groove and held by those snap off bolts and washers.

And using my crocodile earth lead :wink_smile:

 

[Rickster123]

depends

On who's watching?!

 

[Deleted member 64964]

Always remove or cap the meter

 

[erj]

not very offtern, unless its close to the meter

 

[thorn]

I do nearly as often as I use my temporary earth bonding clamps

 

[Deleted member 64964]

I do nearly as often as I use my temporary earth bonding clamps

Is that what that green and yellow lead is with the clips either end? I use it to hang my towels on to dry j the back of the van lol