Discuss Frozen condense in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
S

sparky

Hi all
How do you thaw these, boil kettle and pour it down flue?
 
or if you can get to the conden and its external then use a kettle
DO NOT POUR WATER DOWN THE FLUE
 
Last edited by a moderator:
HAIRDRYER you have problems if you cant get to it you could cut the pipe and pour water down........BUT..........its technically part of the combustion system so not for d.i.y
 
I was just wondering i dont have actually have a problem lol.
 
I have thawed out the condenser pipe but the boiler still shows a fault code for blocked condenser. I have disconnected the condenser pipe from the bottom of the condenser trap and it is definitely empty. Is there anything else I can do?
 
put a bucket under it it may have backed up hence fault code ,trap should be full of water
 
Thanks for replies,
Just realised if i poured water down flue with a blocked condense would overflow to boiler!
 
Think about running some trace heating along the pipe - it will thaw it and stop it from freezing in the future - www.tracesolve.co.uk or ebay (stop pipes from freezing)

Hope this heps.
 
Status
Not open for further replies.

Reply to Frozen condense in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended...
Replies
6
Views
314
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock