Floplast waste pipe sizes help

[Markus19]

Hi guys im wanting to move some of my floplast solvent weld pipes in my bathroom i though the shower was on 40mm and the sink on 32mm which i thought was all you could get however when ive looked at fittings some say 36 on them which i presume is 36mm is there really so many different sizes of waste white pipe and fittings ?

 

[ShaunCorbs]

Push fit or glued ?

 

[Markus19]

Glued / solvent weld mate

 

[ShaunCorbs]

11/4 then solvent measures around 35-36 od

 

[Markus19]

Sorry mate that dont make sense to me

What size in mm are the fittings that available

 

[ShaunCorbs]

32mm is the inside dia so will measureless 35-36mm od hence the fitting being labelled

So you need 32mm fittings for the basin

And 40mm for the bath depending on what your changing

 

[Markus19]

I thought there was
21.5 mm 32mm and 40mm pipe

So i though you got 21.5 ,,, 32 and 40mm fittings then i see the 36mm on the fitting i picked up so thats confused me

 

[Chuck]

Sorry mate that dont make sense to me

36mm is the outside diameter of "32mm" or "1-1/4" inch standard solvent weld plastic waste pipe.

43mm is the outside diameter of "40mm" or "1-1/2" inch standard solvent weld plastic waste pipe.

For other sizes / types there's a table I find useful here:

Plastic|Pipe Sizes|Dimensions|chart

Pipe sizes and descriptions can be confusing. This chart lists pipe sizes and identifies them. Use it to find metric and imperial pipe sizes plus the common domestic waste pipe sizes and underground waste pipe.

www.hendersons.co.uk

 

[ShaunCorbs]

Inside diameters

32mm plus 4mm wall (2mm either side) 36mm od etc

 

[king of pipes]

That was hard work Shaun. Kop