Discuss Floor standing gas boiler in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

bright spark

Plumbers Arms member
Plumber
Gas Engineer
Messages
941
Can anyone reccommend a good quality floor standing condensing gas boiler, have been using a potterton promax's until recently. Had serious probs with a new one that has put me off using that type again.
Thanks
 
promax heat only the same as baxi solo he nightmare boilers what trouble have you been getting?
 
Status
Not open for further replies.

Reply to Floor standing gas boiler in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few...
Replies
3
Views
255
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the...
Replies
5
Views
336
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Replies
5
Views
564
Hi they used to say as a last resort you could discharge the D2 pipework at high level and turn it back to the wall. Similar to a combi boiler. I...
Replies
11
Views
379
Can anyone recommend a decent multi meter, preferably under a 100 pounds. It's for checking boiler components so I don't need a top spec one...
Replies
7
Views
315
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock