flange or no flange?

Post new thread

Discuss flange or no flange? in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

S

SPencer DIY

I am fitting a new shower valve, it has 1/2 inch compression female in/outlets.

I am using a 1/2 in ch to 15mm elbow to get me into my copper pipe network.

Should I use a 1/2 - 15mm adaptor with a flange or without a flange?

What is the flange for anyway?
 
With a flange and tapered thread if you can
 

Reply to flange or no flange? in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

W
Outdoor Tap at Porch
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended...
Replies
6
Views
302
Dave Moore
D
T
22mm MDPE connection
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going...
Replies
1
Views
318
ShaunCorbs
ShaunCorbs
C
Is it necessary to earth bond a Kitchen Sink?
I am in process of replacing an existing sink with a new stainless steel one. The existing tap is plumbed directly to copper which means that it...
Replies
6
Views
320
pritchardsplumbing
P
dreikher
Hole in copper pipe, solder under floor, T coupling & protection
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16...
Replies
0
Views
237
dreikher
dreikher
F
What constitutes a Commercial Appliance and thus a Commercial Kitchen?
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Replies
5
Views
554
FozzieBear
F

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock