Search the forum,

Fitting Hive in the morning, what happens to this? pictures.

Post new thread

Discuss Fitting Hive in the morning, what happens to this? pictures. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

A

armyash

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
2,653
Hi,

I have this receiver in the loft next to the boiler. Do I just remove it if i am fitting Hive?

The new receiver is going in place of the exisiting programmer.

The hub etc all seems straight forward just having a receiver in place at the minute is throwing me off. Any tips?

Thanks

View attachment DSC_2917.JPG
 
What's the old programmer ? Y plan ?
 
I'm guessing 4-7 are commons for each program eg hot water heating

So your switches are 6 and 3

Where does the yellow wire go ?
 
Yellow was going to no where. It was just poked in the wall.

As usual I was overthinking things. Wired up the hive receiver, disconnected the old receiver in the loft and had to move one wire in the wiring center and it was all done.

Thanks
 

Reply to Fitting Hive in the morning, what happens to this? pictures. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
375
Chuck
C
M
Viessmann external flue run conundrum
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
228
mutley racers
M
A
Emergency Stop Buttons in Boiler Rooms
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
289
oz-plumber
O
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
163
Lou
Lou
G
UK Moving Pipes Undersink for Dishwasher
Hello I am looking to install a slimline dishwasher (integrated) into a cupboard in my kitchen. The depth of the dishwasher is 550mm and the depth of my cupboard is larger than this. The issue, however, is that the waste pipe which leads from the sink (next door cupboard) comes out quite a...
Replies
22
Views
466
Basher
B
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Electricians' Talk
BS 5389 Tiling Standards
Tilers Forums UK
DIY Forum
UK Tiling Forum
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock