Search the forum,

Edmonton, London - Thermal Store replacement

Post new thread

Discuss Edmonton, London - Thermal Store replacement in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
L

llrd

Need to replace the existing thermal store on a ground floor flat N18 postcode. Ideally looking to get HEATBANK Pandora.
 
Hi llrd can you not contact HEATBANK to see if they have a list of installers they can recommend in your area....regards Turnpin:biggrin:
 
turnpin said:
Hi llrd can you not contact HEATBANK to see if they have a list of installers they can recommend in your area....regards Turnpin:biggrin:
Click to expand...

While on the phone to them ask about getting the existing one fixed there will be nothing wrong with the primary cylinder just the external stuff.
 
Status
Not open for further replies.

Reply to Edmonton, London - Thermal Store replacement in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

C
Is it necessary to earth bond a Kitchen Sink?
I am in process of replacing an existing sink with a new stainless steel one. The existing tap is plumbed directly to copper which means that it is earthed. The new tap will use flexible tails and so will not be earth bonded. My initial search for information suggests that there is no legal...
Replies
6
Views
238
pritchardsplumbing
P
D
Replacing outdoor P-Trap Gully with Bottle Gully
Hi all, I'm installing a concrete patio out back. By the wall under the kitchen sink I have an existing P-Trap gully for the grey water from the sink, dishwasher, washing machine etc. When I pour the concrete there won't be any chance to dig it up anymore. From my own research I get the...
Replies
0
Views
118
DIwhYdidIstartThis
D
T
22mm MDPE connection
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it šŸ˜¬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
268
ShaunCorbs
ShaunCorbs
jamespipe
Plumber recommendation for heat pump HWS installation
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
301
oz-plumber
O
D
Extending outdoor tap and drain
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to run the water line underneath. There are existing drain (and who knows what) pipes running along the same wall so I'm nervous about digging too far...
Replies
6
Views
231
DIwhYdidIstartThis
D
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tiling Forums UK
Tiling Standards BS5389
Electrical Forum for Electrical Advice
Tiling Tools for Beginners
Tile News
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock