This bath filler/overflow is supposed to turn to divert water flow to a shower above. It’s not clicking across anymore. Does anyone recognise it? Fitted in 2014. It was installed together with this Bristan inbuilt thermostatic controller.
- Thread starter across
- Start date
- Replies 1
- Views 615
- anyone bath filler overflowfiller recognise shower mixer
Discuss Does anyone recognise this bath filler? in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net
Reply to Does anyone recognise this bath filler? in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net
Similar plumbing topics
Can anyone remember the Mira mixer shower that would work down to a really low pressure on a vented hot water system without a shower pump?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few...
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new...
Hi all. Hope you have all been keeping well.
A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...