Search the forum,

Discuss Does a combi 30 cdi greenstar Worcester have a pump over run? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

Inverness

Plumbers Arms member
Plumber
Gas Engineer
Messages
710
Hello, I've read the manual but can't find anything on about pump over run on this Worcester30 cdi greenstar combi 2011 model.
can anyone who has the knowledge I would be appreciate.
 
3 minutes. Manual mentions in the operation sequence bit. It won't say anything in the wiring section as being a combi there is no pump live to wire.
Screenshot_2016-03-11-18-25-50.jpg
 
Yes standard pump over run after every use no matter how long boiler is used for, helps to remove heat from heat exchanger and save over heating
 
Status
Not open for further replies.

Reply to Does a combi 30 cdi greenstar Worcester have a pump over run? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
1
Views
137
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
224
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
199
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
119
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to run the water line underneath. There are existing drain (and who knows what) pipes running along the same wall so I'm nervous about digging too far...
Replies
6
Views
227
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock