Danfoss RAS-C2 removal

Post new thread

Discuss Danfoss RAS-C2 removal in the USA area at PlumbersForums.net

H

hhstu

Messages
4
Hi have just bought the hive TRV's and I'm trying to fit them I have the Danfoss RAS-C2 currently I have managed to unscrew the gray bit and the hole head turns but I cant get it to come off am I missing a step? I didn't install them they came with the house.
ae235.jpeg
15757152058967937167854885888717.jpg
15757152484311673958165804679192.jpg
 
Last edited:
Wiggle and pull defo your on the right lines just pull
 

Reply to Danfoss RAS-C2 removal in the USA area at PlumbersForums.net

Similar plumbing topics

D
TRV valve body compatibility with Hive?
Hi I am trying to fit a Hive Radiator valve into my existing TRV valve body to make them automatic so have bought a Hive valve to try it out. I...
Replies
1
Views
392
ShaunCorbs
ShaunCorbs
S
Danfoss RAS-C2 gland replacement - quick question
Hi guys. Very specific question... Got a RAS-C2 where the pin will only move a fraction of a mil and no amount of the usual tapping/WD40 will...
Replies
6
Views
2K
simonhill
S
E
Danfoss HPA2 Actuator Stuck
Hi everyone, my first post here so go easy on me... 😄 I have Danfoss HPA2 motorised valves fitted to my heating system and one of them is giving...
Replies
1
Views
254
ShaunCorbs
ShaunCorbs
S
How to remove Danfoss TRV
Hi all, Hope you are all well. I am trying to remove this Danfoss TRV, but struggling to work it out. I assume I need to turn the grey collar...
Replies
2
Views
2K
Sleepy_Barbarian
S
R
Danfoss RAS-C2 10mm swapping out
I’m planning to drain down my system to replace the 3 way valve which has been buzzing away for months and occasionally sticking. While I’ve got...
Replies
11
Views
3K
Rinnes
R

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock