connecting condense to square downpipe

[splinterdream]

Could somebody tell me the best method of connecting condense to square downpipe? Is there an adapter or is it just a case of drilling a hole with a speedbit?

Thanks for any answers

 

[kirkgas]

buy a square branch, then a square to round connector, which is used to join round into square (I'm good aren't I!!!!!) then a reducer to 32mm

 

[stevetheplumber]

over flow conector drill hole and drop piece of string with a small wieght on the end tie on internal part and pull it up and through the hole

 

[Alpha man]

Cut a rain water hopper in.

 

[REDSAW]

Cut a rain water hopper in.

building control dont allow hoppers!!

 

[Blackcatgas]

building control dont allow hoppers!!

But will alow you to discharge into a gully, Ive never understood that.

 

[Alpha man]

But will alow you to discharge into a gully, Ive never understood that.

My thoughts exactly, and the amount of condense pipes either run in copper or discharge incorrectly, maybe building control should start inspecting a few properties!!

 

[Dotty]

I was gonna say summat derogatory about building control and include a comment about back handers but i reckon i'd get into bother...............