Search the forum,

Discuss Commercial Kitchens and Catering work around London in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

ambrosia

Plumbers Arms member
Plumber
Gas Engineer
Messages
892
Just completed my catering CoDC1 and COMCAT1/3 and looking to get some experience

Previously I've done commercial installations so I'm used to working in barrel etc

I've also done a lot of domestic work, I have CCN1 plus 4 elements. I'm pretty good at fault finding and fixing domestic boilers and heating systems

If you require anyone for a day or two here and there, or if you have a big project which you'll need a hand with give me a shout

Many thanks
Seth
 
Hi i know this was left a long time ago. But i see you're still active on the forum.

I maybe have some work for you in some commercial kitchen around central london

Contact me at
 
Last edited by a moderator:
Status
Not open for further replies.

Reply to Commercial Kitchens and Catering work around London in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all. As the title says, I have a problem with an unvented cylinder I had installed last year where the first time I turn a hot tap on after the cylinder has been heated I get what sounds like a vibration. It generally starts about 1s after I open the tap and lasts for about 1.5s. I've...
Replies
27
Views
2K
Hi All, In Dec 2023 I had my annual boiler service and asked the plumber to change 2 radiator valves as the radiator in the toilet downstairs was not working. He changed both valves and still the radiator was not working. He put some chemicals in and said it should break up anything that is...
Replies
7
Views
471
I have read a few threads including one by Debbie Stano that were similar to my issue but that thread stopped a while back without any resolution I could see. I'm in Brisbane, Australia but I'm after general ideas from anyone here or in UK (I realise this is a UK based site). Point form...
Replies
1
Views
962
    • Like
Hi all, We recently purchased a house and nothing seems to work correctly here, I've spent weeks rectifying issues. Plumbing, electrical, carpentry it's been never ending. The house was built by Barratt Homes in the year 2000, it is a 3 bedroom house called a Palmerston, the CH/HW system is a Y...
Replies
47
Views
5K
Hi everyone I really hope you can help me. I'm 26 now and live in London, I've been doing a bit of career hopping since leaving school at 16 in 2011. The first thing I done after secondary school was gain my Domestic Plumbing and Heating City and Guilds Level 2 and then 3 at college. However...
Replies
5
Views
2K
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock