Search the forum,

Discuss combi boilers choice in the Plumbing Jobs | The Job-board area at PlumbersForums.net

I have seen a combi installation where the infloor loop was driven off of the potable side, the space heating loop was driving low profile rads which run at a higher temperature. Whoever did this work felt this was a simple solution and failed to use potable fittings and tubing.

If you are looking to install a combi boiler then you have come to the right place! We at All Heating One always welcome you to contact us for further information on selecting the correct combi boiler for your house, comparing pricing, suppliers, and all installation procedures.
 

Reply to combi boilers choice in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
229
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
436
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock