Search the forum,

Chartley shower valve

Post new thread

Discuss Chartley shower valve in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
T

thereisawizza

Plumbers Arms member
Plumber
Gas Engineer
Messages
672
IMG_0672[1].jpg

'evening all, anyone heard of Chartley showers? Aside from the glass handles (!) am looking to get a service kit, temp control has gone stiff.........
 
Status
Not open for further replies.

Reply to Chartley shower valve in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

M
Mixer mixer shower, compatible with tanked supply
Can anyone remember the Mira mixer shower that would work down to a really low pressure on a vented hot water system without a shower pump?
Replies
2
Views
121
Last Plumber
Last Plumber
F
Mystery Mira Elite QT Leak
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
234
Firefox
F
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
136
Lou
Lou
C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
201
SimonG
SimonG
F
  • Question
No Hot water, Fixed and Broken Again Ideal Logic 24
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
139
Lou
Lou
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tile News
Electrical Forum for Electrical Advice
UK Tiling Forum
Contractor Forum
Tiling Blog
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock