Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss cast iron pipes in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
G

gary22

im currently working my way through plumbing course and have reached a question which im having difficultly find the answer......which is not a method of manufacturing cast iron pipes? (a)bell casting (b)centrifugal casting (c)sand casting (d)spuncasting? anyone help?
 
Status
Not open for further replies.

Reply to cast iron pipes in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16...
Replies
0
Views
226
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
Replies
6
Views
300
S
Hi, I seemed to have a blockage in kitchen sink. A plumber came and cleared all the pipework that is visible inside my home (there was debris and...
Replies
2
Views
141
Sonya K
S
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...
Replies
9
Views
275
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Replies
5
Views
536
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock