Discuss Can anyone identify these taps? in the Plumbing Jobs | The Job-board area at PlumbersForums.net
- Messages
- 10,444
They look hideous so possibly a Hudson’s Reed?
B
Burger
Looks like they based it on a dinner bell:
- Messages
- 8,642
Too posh for Hudson Reed mate lol
Reply to Can anyone identify these taps? in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Similar plumbing topics
Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't...
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer...
Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few...
I have attached an image of the brass body within a tap. Having replaced a cartridge which has cured a leaking tap, I can see that there is a...
Creating content since 2001. Untold Media.
Newest Plumbing Threads
-
Capping a redundant gas cooker supply
- Started by Jocky B
- Replies: 3
-
-
Water pump to regulate high pressure?
- Started by Nikileaks
- Replies: 2
-
Any advice for putting this shower in ?
- Started by Staggersandfalls
- Replies: 2
-
king of pipes no reply from private message
- Started by cjg
- Replies: 1
-
-
-
Why pressure gauge drop without leak
- Started by sanju pradeep
- Replies: 6
-
Hot water so hot tap and shower via our hot water tank
- Started by thecar
- Replies: 4
-
-
Running copper pipework above / across a Gas boiler?
- Started by kristeva
- Replies: 2
-
Installing pipework to avoid airlocks
- Started by Matt0029
- Replies: 1
-
DUK Pipes for thermostat shower fitted at different heights
- Started by Delforkids
- Replies: 2
-
-