Search the forum,

Broken 8" drop drain tee

Post new thread

Discuss Broken 8" drop drain tee in the USA area at PlumbersForums.net

L

Lsains

Messages
7
Hi guys,

I'm not a plumber but I am in the trade so I do have some knowledge, but this one is a bit tricky.

I have an old concrete manhole with an 8" clay pipe drop drain going into it from approx a meter up.

Now someone in their wisdom has joined into this pipe with 6" plastic and just sat the end of the pipe halfway over the opening of the drop drain, I assume they delicately broke the collar of the tee as it is no more.
So I have a broken 8" clay tee, does anyone know how I can get over this?

Thank you
 

Reply to Broken 8" drop drain tee in the USA area at PlumbersForums.net

Similar plumbing topics

D
Extending outdoor tap and drain
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to run the water line underneath. There are existing drain (and who knows what) pipes running along the same wall so I'm nervous about digging too far...
Replies
6
Views
232
DIwhYdidIstartThis
D
D
Covering shallow sewer pipe under concrete Patio
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
245
DIwhYdidIstartThis
D
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
344
Chuck
C
B
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
232
oz-plumber
O
M
Viessmann external flue run conundrum
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
213
mutley racers
M
Creating content since 2001. Untold Media.

Newest Plumbing Threads

UK Tiling Forum
Tilezine Tiling News Tile Association
Tiling Forums UK
Electrician Talk Forum
Tiling Forum UK
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock