Discuss Brand new shower mixer valve not switching off in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net
Installed a victorian plumb shower valve and tested last night, on and off no problem. Tested againg tonight and it came on but wont switch off.
Contacted victorian plumb and have to wait up to 72 hours for a reply.
Any ideas on what I can try as weve been without a shower for over a week now and really need to get on with this installation, Ive still got to tank, fit panels and shower enclosure druing "after work hours".
Many thanks
Esteemed
Gas Engineer
Subscribed
Need more info really. Which shower valve?
What system do you have? Vented/unvented? Combi/pumped etc?
Any pics?
I have a combi mate, I have just had a look inside the valve and found a piece of the casting wedged inside the valve stopping it from closing fully.
I removed it and all is now well.
Thanks for replying though mate, felt really stuck before
Esteemed
Gas Engineer
Subscribed
I have a combi mate, I have just had a look inside the valve and found a piece of the casting wedged inside the valve stopping it from closing fully.
I removed it and all is now well.
Thanks for replying though mate, felt really stuck before
No worries, glad you got it sorted.
I’m not a fan of Victorian Plumb due to the difficulty in getting spares in as little as 2 years since purchase.
With that said and your valve installed and working, I highly recommend getting a spare cartridge for when your current one fails.
Esteemed
Plumber
Gas Engineer
Subscribed
I've had 2 fail from them and pita to deal with to replace a cartridge, I Stick to branded showers .kop
Reply to Brand new shower mixer valve not switching off in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net