Search the forum,

Discuss Bleeding tube for an oil burner in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
E

eagel

Hi we have got an Worcester Greenstar heat slave 12/18 boiler and had to recently bleed it. it was quite ***bersome and a tube with a valve, which one can turn off would make it easier. any body know where i can buy one and what it is called?
i saw on on u tube but he did not say where to buy it or what it is called.

thanks
 
Sorry friend but that doesnt make a whole lot of sense. What are you bleeding?
 
presSure testing kits cost 380 plus vat and they have a connector and tube to bleed the pump, or disconnedt the flexi hose and suck on the end, or call an engineer and after that dont let you tank run dry.
 
Status
Not open for further replies.

Reply to Bleeding tube for an oil burner in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I have changed the 3 port actuator Honeywell head however this doesn’t seem to have solved the issue, does this mean that the programmer is faulty? Or is...
Replies
8
Views
277
Does anyone know where I can get one of these? Toilet is leaking into the bowl. This one pushes in with a half turn but I can't find one anywhere.
Replies
2
Views
194
Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few seconds! Can anyone tell me what is causing this? And how to cure?
Replies
3
Views
200
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
118
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
232
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock