Search the forum,

Discuss Baxi 600 asking for heat in the Central Heating Forum area at PlumbersForums.net

Messages
14
Baxi 600
central heating is set at minimum
the radiator symbol on the boiler is flashing. (asking for heat .fan is still running )
this is like this all day
is this correct before I call out engineer

there are no other controls ie time lock or room stat on system
 

Attachments

  • image.jpg
    image.jpg
    362.5 KB · Views: 11
There will be a room stat any chance of a picture of the whole boiler and pipework?
 
There are no other controls fitted
boiler is wired to a fused spur

Well that’s no good and not upto regs it needs a thermostat or some control

Yes it will constantly run
 
Yes I had an ancient boiler set up like that when we moved into our house, zero controls not even a timer nor a room stat.
We basically just switched it on at the wall when we wanted heat and off when not - not compliant to current regs of course . But you can heat your house/water like this. Ours has now been replaced following extension etc, but we used it like that for 3 or 4 years.
 

Reply to Baxi 600 asking for heat in the Central Heating Forum area at PlumbersForums.net

Similar plumbing topics

  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
123
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
1
Views
127
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
441
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock