Search the forum,

Discuss Bathroom wall panel help in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

Messages
276
Hi everyone, today while in the shower I managed to whack my elbow off my bathroom wall panel and made a small dent. I cracked a deep cut in my elbow and don't even know how it happened.
My question is can I fix the dent at all any advice would be much appreciated thank you.
 

Attachments

  • IMG_20220514_165507_395.jpg
    IMG_20220514_165507_395.jpg
    143.5 KB · Views: 14
In short it’s the cheaper plastic construction panel it’s not solid and if knocked will dent

As for repair 3 options

Fill it with white silicon
Find a decent magic repair man
Replace the panel
 

Reply to Bathroom wall panel help in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
323
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
226
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
196
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
231
I have an ideal vogue max S18 boiler and I’m considering fitting auto balancing TRVs, my question relates to the boilers pump. I see a boiler pump menu for either 70% or 100%, so, is the pump set at either one of two fixed speed percentages or does the pump actually vary speed, (modulate)...
Replies
1
Views
143
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock