Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss ASHP and Bulk LPG Tank separation distances? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
F

Flamethrower

Anyone know of the regulations that would apply to a situation where an air source heat pump would be fitted in relative close proximity to a bulk LPG tank?

I have looked at the LPG regs and nothing seems to be applicable?

Any help would be appreciated!
 
Last edited by a moderator:
Status
Not open for further replies.

Reply to ASHP and Bulk LPG Tank separation distances? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
421
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
203
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I...
Replies
8
Views
373
I have an ideal vogue max S18 boiler and I’m considering fitting auto balancing TRVs, my question relates to the boilers pump. I see a boiler...
Replies
1
Views
179
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Replies
5
Views
538
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock