Discuss Aqualisa Aquastream Mk 1 , help with Printed Circuit component in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
7
Hello,

Can anybody help me identify TR1 (looks like a 3 legged can) next to the Relay on the PCB. Mine has a broken lead and no longer runs. Aqualisa offer no help with such an old product but that's all it is wrong as far as I can see. I'm an electronics engineer, there are many possilbe options so can't easily guess. I don't have a circuit diagram of course. The part number has faded so can't read. A photo from a good unit might be good enough , thanks in advance. (Apologies if this has posted already today but I can't see it.)

Alan
 
Status
Not open for further replies.

Reply to Aqualisa Aquastream Mk 1 , help with Printed Circuit component in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Can anyone recommend a decent multi meter, preferably under a 100 pounds. It's for checking boiler components so I don't need a top spec one...
Replies
7
Views
304
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16...
Replies
0
Views
237
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to...
Replies
6
Views
287
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
Replies
6
Views
315

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock