Search the forum,

Discuss Any good? Drill in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
G

grahamgas

Morning All

Looking at buying the drill below.Anyone have or had this drill?Any comments welcome.

Hitachi DH24DVC 4kg Cordless SDS Plus Hammer Drill 24V - NoLinkingToThis, Where the Trade Buys

Regards
Graham
 
looks like a good bit of kit to me,should last you years

I have the dewalt,three battery set,had it four years ,still works like new,as should the Hitachi set


:):)


imho
 
Last edited by a moderator:
i have the mains version,cracking piece of kit,owned 3 years no problems
 
its the cost issue for me, surley it is about time they got there acts together and started selling packs of holes instead. a lot easier and cost effective imo.
 
Status
Not open for further replies.

Reply to Any good? Drill in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

    • Like
  • Sticky
We have 2 brand new cordless, battery powered press tools in stock, and flying off the shelves. Our TekTools TZ1930 & TZ1550 are packed with advanced features - these cordless press tools are engineered for speed, precision, and ease of use across various applications. Just reply to this thread...
Replies
5
Views
878
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
232
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
136
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
257
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I have changed the 3 port actuator Honeywell head however this doesn’t seem to have solved the issue, does this mean that the programmer is faulty? Or is...
Replies
8
Views
282
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock