Annual inhibitor concentration testing

[Jonnyjambo]

Whilst filling out the new benchmark during the commissioning of a boiler I noticed on the servicing section that there is now a requirement to annually test the concentration of the inhibitor in the system.

Why is fairly obvious, but it’s more the real world how?

Great if you fitted the boiler and always use a particular inhibitor eg Fernox then it’s easy you just get the Fernox test kit and away you go.

However, day to day we attend boilers that we’ve previously had nothing do with so have no idea what inhibitor is in there.

Is there a generic inhibitor testing kit available that isn’t brand specific? I found this article below:

HVP Magazine - https://www.hvpmag.co.uk/Annual-inhibitor-checks-are-vital-for-system-protection-explains-the-HHIC/11131

Now to the real world! If a generic kit isn’t available. What is expected of us as service engineers. Are we expected to either carry multiple test kits which still won’t cover all cases or drain down and refill with your referred inhibitor? Baring in mind they often says not to mix the brand of chemicals.

Seems to me a little impractical in the real world.

 

[SimonG]

Probably to shift the onus and costs to the service engineer.
Warranty call, waters poor, not covered, service engineers fault for not checking water. ££££££.

Foe a proper test it will need sending away, not cheap.
Just chuck in a bottle of cheap inhibitor in at every service. Arse covered.

 

[Ric2013]

Just chuck in a bottle of cheap inhibitor in at every service. Arse covered.

Ah. But then they'll say you didn't have a proper test carried out. Then they'll ask whether the TDS is within acceptable levels and what about turbidity?

Surely, though, if we're talking about the Benchmark, then either you'd know what inhibitor has allegedly been used.

If there isn't a benchmark or any documentation, then flush and refill is best advice and up to customer if they choose not to go for it. Am I missing something?

 

[SimonG]

Ah. But then they'll say you didn't have a proper test carried out. Then they'll ask whether the TDS is within acceptable levels and what about turbidity?

Surely, though, if we're talking about the Benchmark, then either you'd know what inhibitor has allegedly been used.

If there isn't a benchmark or any documentation, then flush and refill is best advice and up to customer if they choose not to go for it. Am I missing something?

Only asking for inhibitor concentration.

 

[Ric2013]

Only asking for inhibitor concentration.

Fair point, but if they want to shift responsibility when something goes wrong, they'll still blame the water quality if it fails to meet spec regardless of the inhibitor concentration, won't they?

 

[SimonG]

Fair point, but if they want to shift responsibility when something goes wrong, they'll still blame the water quality if it fails to meet spec regardless of the inhibitor concentration, won't they?

Warranties (insurance) will always look for an easy out.

 

[Jonnyjambo]

Probably to shift the onus and costs to the service engineer.
Warranty call, waters poor, not covered, service engineers fault for not checking water. ££££££.

Had crossed my mind but do see the value in it, if it can reasonably be done. Of course anything can an done!

Just chuck in a bottle of cheap inhibitor in at every service. Arse covered.

Reasonable approach if there’s no compatibility issue of mixing chemicals.
[automerge]1604166042[/automerge]

Surely, though, if we're talking about the Benchmark, then either you'd know what inhibitor has allegedly been used.

If there isn't a benchmark or any documentation, then flush and refill is best advice and up to customer if they choose not to go for it. Am I missing something?

You’re not missing anything just a discussion how to comply. So customer says how much to service my boiler. You quote to refill and drain and service and someone say to customers no you don’t need to do that. charges much less than you, customer sees a cheaper price and goes for it. You lose the job. You see it happening all the time.

Agreed, as mentioned if you’ve installed it and know the history, easy no drama.

 

[Scott_D]

I have been looking at the Adey instant test kit.
looks good but will
Cost £3-£5 per test plus the time involved.
Then you have to argue with the customer about why they need a flush and/or inhibitor.

 

[Jonnyjambo]

I have been looking at the Adey instant test kit.
looks good but will
Cost £3-£5 per test plus the time involved.
Then you have to argue with the customer about why they need a flush and/or inhibitor.

Just found this:

BES.co.uk | Next Day Delivery On 15,000 + Plumbing Supplies

Order inhibitor test kits and other central heating testing products online at BES.co.uk. Low Prices, Free Next Day Delivery Available, 15k Plus Products in stock. P/N: 24768

www.bes.co.uk

Universal! That might solve the ‘how’ for testing. Still leaves the compatibility of chemicals as a potential issue, although I suspect that’s not really an issue more like a method to get people to stick to a specific brand. Only option is drain, flush and refill with preferred choice.

 

[Last Plumber]

Take a sample (half fill a glass jar), put a 6" nail in it half in half out, leave it overnight and see if the nail rusts.
Other sizes of nail are available.