Search the forum,

Advice for gas engineer jobs, i have plumbing and some gas experience

Post new thread

Discuss Advice for gas engineer jobs, i have plumbing and some gas experience in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
M

Mattiesouth

Iv recently passed my CCN1 core gas with additional elements and am awaiting to do my boiler element and I'm currently looking to further my knowledge and skills in these areas, I HAVE A YEARS EXPERIENCE PLUMBING AND WORKINMG ALONG SIDE A GAS ENGINEER DOING BOILER INSTALLS

I HAVE GOOD KNOWLEDGE JUS NEED A LITTLE HELP!!!!!!!!!!!!!!!!!!!!!!!

I'm 27 and live in SOUTHEND if you think You have some work or I could be a help to you I can forward you my cv I do have experience in plumbing and boiler installs, obviously I'm not looking for great money/ MAYBE FREE jus need to get back out there after being at college for a while, many thanks Matthew Thomas
 
Status
Not open for further replies.

Reply to Advice for gas engineer jobs, i have plumbing and some gas experience in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Lou
  • Article
Plumber Who Worked Illegally Gets Suspended Sentence
A Plumber Who Worked Illegally Gets A Suspended Sentence After Falsely Claiming To Be Gas Safe Registered. A Plumber in Herefordshire was prosecuted after Hereford Trading Standards Team found that he was falsely claiming to be on the Gas Safe Register when he was not, putting members of the...
Replies
0
Views
92
Lou
Lou
F
What constitutes a Commercial Appliance and thus a Commercial Kitchen?
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
405
FozzieBear
F
C
Y Plan, no hot water but heating is working when called
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I have changed the 3 port actuator Honeywell head however this doesn’t seem to have solved the issue, does this mean that the programmer is faulty? Or is...
Replies
8
Views
239
John.g
J
M
Viessmann external flue run conundrum
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
174
mutley racers
M
D
Extending outdoor tap and drain
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to run the water line underneath. There are existing drain (and who knows what) pipes running along the same wall so I'm nervous about digging too far...
Replies
6
Views
224
DIwhYdidIstartThis
D
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock