Search the forum,

Keston boilers

Post new thread

Discuss Keston boilers in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
S

SafeGasInstall

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
8,593
Merry X mas to you all !!!

Just wondered if can any one explain what is so special with this type of boilers ,that they so expansive !have never come a cross one !

thx you !!!
 
Basically they are so expensive as it takes a lot of man power and time to make a boiler of such poor quality look so good !!
If you have never come across one, you have been blessed, try to hold on to that record
They are good for a few years and then turn into Lemons

If anyone has one, usually around the s/w London area, you must get them checked every year, which with their life span is only four checks at most

imho
 
got some right pics of one at a mansion i went to, when i find me bluetooth i will download them.
 
ive been to 2 kestons this week. they are in the same league as ravenheat and sime if not even worse.
 
Nice keston in a nice large house located in the boiler room,
spot any problems?.
That dark patch on the wall is an inch deep btw.
Photo-0014.jpgPhoto-0015 (2).jpg
 
Status
Not open for further replies.

Reply to Keston boilers in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

ian.
UK Auto balance trv and Ideal Vogue boiler
I have an ideal vogue max S18 boiler and I’m considering fitting auto balancing TRVs, my question relates to the boilers pump. I see a boiler pump menu for either 70% or 100%, so, is the pump set at either one of two fixed speed percentages or does the pump actually vary speed, (modulate)...
Replies
1
Views
142
John.g
J
A
Emergency Stop Buttons in Boiler Rooms
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
249
oz-plumber
O
M
Central heating losing pressure all the time
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
1
Views
121
fowlerboi
F
R
Multi Meter which one for engineers
Can anyone recommend a decent multi meter, preferably under a 100 pounds. It's for checking boiler components so I don't need a top spec one ....just easy to use and reliable. The fluke 115 looks good but its above my budget. My current socket and see one was great but it's developed a fault.
Replies
7
Views
221
oz-plumber
O
P
Viessmann combi starts when cold, mixer, tap is opened
Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few seconds! Can anyone tell me what is causing this? And how to cure?
Replies
3
Views
200
ShaunCorbs
ShaunCorbs
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock