Discuss Had a bump in the van in the Plumbing Jobs | The Job-board area at PlumbersForums.net
- Messages
- 34,332
- Solutions
- 2
did they admit fault?
- Messages
- 10,444
Never admit anything. 
- Messages
- 6,131
Not really. Tourist in a hire car trying to get back onto the motorway
Last edited:
- Messages
- 34,332
- Solutions
- 2
Feck sake
- Messages
- 6,131
Thats exactly what I shouted as they hit me
- Messages
- 10,444
- Messages
- 8,642
Dash cam ???
- Messages
- 6,131
No
But I think I will buy one
- Messages
- 8,642
Mines been bust for months now , I better get my finger out now
- Messages
- 6,131
What do you have?
So many to choose from it’s a minefield
- Messages
- 725
Defo get a cam. Just had some idiot try and say I cut him up before he went in to the back of me. If I had a cam that would not have been a problem now it is a pain. His word against mine as no witnesses.
- Messages
- 5,439
I had one too last week. Well not so much a bump as a big dent in the passenger door and an exploded window. Write off. Fun times.
- Messages
- 6,157
Occupational hazard Scott its happened to us all mate hope you have a satisfactory outcome. Kop
- Messages
- 8,642
It is a minefield pal , mine is too complicated, I will go find a cheaper one with less features, let me know how you get on .
Reply to Had a bump in the van in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Similar plumbing topics
Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few seconds!
Can anyone tell me what is causing this?
And how to cure?
Hi All
I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Hi all I'm hoping someone can shine a light on this for me
Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall)
Unfortunately turning this to the closed position only reduces...
I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for this tap so I'll have to close the stopcock. I tried closing it today but it won't go absolutely 100% closed and there is still a very slight flow...
Hello all,
I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Creating content since 2001. Untold Media.
Newest Plumbing Threads
-
Replacing outdoor P-Trap Gully with Bottle Gully
- Started by DIwhYdidIstartThis
- Replies: 0
-
-
-
-
-
Mixer mixer shower, compatible with tanked supply
- Started by Matt0029
- Replies: 2
-
-
No Hot water, Fixed and Broken Again Ideal Logic 24
- Started by Filthbags
- Replies: 2
-
-
What's happening to this radiator, paint flaking off?
- Started by mikmikmikmik2024
- Replies: 3
-
Is it necessary to earth bond a Kitchen Sink?
- Started by Cello
- Replies: 5
-
Show us your fanciest radiators you have installed!!
- Started by Lou
- Replies: 2
-
Y Plan, no hot water but heating is working when called
- Started by Chopper9495
- Replies: 8
-
-
Towel Rail Valve Advice please (35 Characters needed.)
- Started by NorthernLad
- Replies: 7
