Search the forum,

Scaffold yay or nay....

Post new thread

Discuss Scaffold yay or nay.... in the Plumbing Jobs | The Job-board area at PlumbersForums.net

M

mutley racers

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
5,172
So need to change this boiler. Donyou think I need a scaffold or just a Lon ladder and roof ladder?

20181022_075556.jpg
 
i would go either ladder and cat or cherry picker

or employ a roofer
 
Let’s take it as 3m a floor 3 floors so 9m - 10 m roughly in height so yes
 
mutley racers said:
That's what I had thought. Thanks. Excited to have a go on this thing. Great idea. Think no will take a cat ladder just incase
Click to expand...

Do it on a dry day and watch the ground if wet
 
Where would you set up a cherry picker, is there flat solid ground anywhere near as I wouldn't dare put it on the grass.
 

Reply to Scaffold yay or nay.... in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

R
Multi Meter which one for engineers
Can anyone recommend a decent multi meter, preferably under a 100 pounds. It's for checking boiler components so I don't need a top spec one ....just easy to use and reliable. The fluke 115 looks good but its above my budget. My current socket and see one was great but it's developed a fault.
Replies
7
Views
218
oz-plumber
O
M
Viessmann external flue run conundrum
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
172
mutley racers
M
B
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
219
oz-plumber
O
M
Central heating losing pressure all the time
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
1
Views
112
fowlerboi
F
N
Towel Rail Valve Advice please (35 Characters needed.)
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about this one. Granddaughter just moved house and this valve decided to leak when it was closed. When open its fine. Normally I have repacked the gland on...
Replies
7
Views
178
Timmy D
T
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock