Remeha Avanta 18v fuse holder

[SlimD]

Anyone any idea where I can get a fuse holder for an Avanta 18v?
It's the 2AT fuse that sits on the PCB. It's sprung and has this silly little metal hook that holds it in place once you twist it. Tiny hook snapped off so fuse wont stay in board so boiler wont run unless you hold the fuse in.
My local boiler spares says not available on its own so need a new PCB.
Seems mental to have to replace a whole PCB for the sake of one tiny fuse holder.
Anyone any suggestions?

 

[ShaunCorbs]

Have a look at rs components

 

[SlimD]

Have a look at rs components

Thanks but I should have said I've already trawled through their website and the local electronics shop.

 

[ShaunCorbs]

Thanks but I should have said I've already trawled through their website and the local electronics shop.

Replace the fuse holder by desoldering it you any good at electronics?

 

[SlimD]

Replace the fuse holder by desoldering it you any good at electronics?

Not too bad but will any similar sized fuse holder do?

 

[ShaunCorbs]

Not too bad but will any similar sized fuse holder do?

Should do yes the hole width is key

 

[SlimD]

Should do yes the hole width is key

I'm guessing I'd have to remove the pcb to check that first?

 

[ShaunCorbs]

I'm guessing I'd have to remove the pcb to check that first?

Yea