Hi
Can anyone recommend a compact pump that could take the water from an unvented cylinders discharge pipe? I’ve got one that needs to go in a basement but there isn’t a great deal of room to locate it.
cheers
Ive been asked to replace some supports inside cold water storage tanks in a build building due to the existing ones being a Legionella risk. At the moment, hollow PVC-u pipe is used, does anyone know where to buy replacements or what is used for them? There is only 1 per tank and they are...
Hello all.
I have fitted three new Saracen timed flow valves to existing shower rooms.
But these valves are still allowing water to flow from shower head and won't close off.
I have tried various options and sorted other connections in the shower lines 5 on one line 3 on other. Only 1 new...
Hi all,
I'm on the committee on a community of owners for an apartment complex in Spain. It consists of 130 apartments. We have continual problems of sediment in the incoming water supply, blocking aerator in the taps, filters in shower mixers and even flexible pipes.
It's a common problem...
Hello, running pipe isn’t a standard part of my day to day as a power generation engineer but occasionally install inch fuel pipe for fuel delivery systems. I am now about to take on a more in dept installation and was after some advice regarding the maths and industry methods of measuring the...
Looking to replace a faucet with spray hose in a small commercial kitchen. we did have one installed by a plumber a while ago but in all honesty it seemed like a piece of chinese crap off of Amazon. Very similar to the American T&S model. It leaked like hell and after only a couple of months the...
I have an Intergas 2030-3 0/0 dual fuel burner; circa 1998, connected to a strebelwerk chamber. The burner hinge had a crack in it and was thrown away. turns out intergas no longer make the part... does anyone know where i might be able to get hold of one?
I have a query regarding tightness testing to UP1a. Should the regulator be bypassed whilst testing an existing installation? Section 5.7.1 says by pass components but i am being told that does NOT include the regulator? Can anyone shed some clearer light on this please?
Hi all.
I just wondered whether any of you are currently doing any site work on a price?
Only on the plumbing side no gas. Things like cylinder installs, 1st fixing and 2nd fixing.
I know this will vary across the country, I’m based in the midlands.
Any advice would be helpful.
Cheers
I had an electric boiler installed recently which required the boiler to be inhibited by an electric shower. The proposed installer wanted to use a Heatrae Sadia Relay RL1. I stopped this, as an electrical engineer this unit is NOT complaint to electrical regs unless the cables to the fuse...
Hey, forum friends! 👋 Excited to introduce Master Drain Ltd, your go-to expert for top-notch drain installation and repair services. Here's what sets us apart:
🔧 Seamless Installation: When it comes to drain installation, precision is key. Our skilled team at Master Drain Ltd ensures that your...
Hello all.
I lease an industrial space in the United States, in which I will be doing manufacturing of ceramic, pottery type items. The space is zoned for manufacturing and the applicable plumbing code is: State of Illinois Plumbing Code, 2004 edition and subsequent amendments.
I am...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.