Search the forum,
  • Thread starter Billy Bob Bob
  • Start date
  • Replies 298
  • Views 5K

Discuss your real name in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
When I was at technical college (btec business course) the accountancy teacher was called Mr. Willy.

It was our first lesson on the course and he came in and without a word wandered up to the front. Found a piece of chalk and on the blackboard he wrote in 3 foot high letters:

W I L L Y

Without turning round he put the chalk down admist some giggles (most of us were 18-19 years old). Then he turned to us:

"That is my name and I've heard them all. I'm here to teach you accountancy and not listen to jokes about body parts."

Cracking introduction and it turned out that he was about the best teacher we had on that course.
 
theres a boy i know called paul ness, his initials are P.Ness, sounds awful lot like ***** doesnt it ? you can guess what his nickname was
 
Great film, that one!

Went to see Billy Elliot at the west end last year,great show,I had not seen the film,did not realise it was set at the time Maggie send hundreds of police from the south on double and triple time to sort the miners out,they made a fortune
 
i had a pint with him last year in holmfirth , he was filming upstairs and one of the extras leant on the cooker and caused a gas leak. i had to go sort it out. reall nice paid very well
 
Status
Not open for further replies.

Reply to your real name in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

  • Sticky
Morning to any Australians lurking around! Register its free, then message me, I'll sort your account out for you. We will need a moderator from each main country too. I'll post this in the Australian forum now.
Replies
0
Views
79
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
249
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
140
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
337
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
467
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock