Search the forum,

Discuss Would you trust/avoid FloPlast for new Underground Drainage in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
J

jonjack

Hi

I am replacing a damaged part of my household soil pipe base and some of the salt-glazed pipe.
I have bought some FloPlast pipe and couplings from Screwfix but am now a bit worried by some of the posts on here regarding FloPlast being cheap and not to be trusted.

I am not a professional but fairly competent but this is my first go at doing some underground waste.

Is the general consensus to avoid FloPlast?

regards
Jon
 
They're cheap for a reason!

Stick with quality makes.
 
What about Marley products?

I cannot see any underground drainage pipes or connections on the McAlpine site so assume their stuff is for above ground only.

Marley better than FloPlast?
 
I have installed some floplast fittings & soil stack, I found them to be just as good as other makes at double th price!

Just install it well, grease all rubber seals, cut & deburr pipe etc, support it well in the ground also!
 
Avoid Floplast like the plague. Everything they make is cheap tat and fails quicker than the decent brand names. This is one area where you get what you pay for. The only thing they make that I do rate is their AA rated air admittance valves.

Oh and avoid their push fit plumbing systems, they leak like a flood in the Southern Counties.
 
Status
Not open for further replies.

Reply to Would you trust/avoid FloPlast for new Underground Drainage in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
268
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
501
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
375
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock