Williams test pump bargain!

[markfxy]

went to williams today to get some 28mm end feed fittings came out with a TT60 test pump for £48 plus the vat its way better than the TT40 but the same price! cheers Ray :santa_smiley:

 

[newcastle phill]

Are these still on the go at that price.
What postage

Mines went pop

 

[Ray Stafford]

Are these still on the go at that price.
What postage

Mines went pop

Price good to Xmas, but its the TT40 - we did have a few TT60s courtesy of the supplier being out of stock on TT40, but we think all the TT60s are now gone.

Delivery free for orders over £100 + VAT, otherwise a tenner.

Ray

 

[mfgs]

Ray, what is the warranty on the TT40? I bought one from you a couple months back and its broken.

 

[Ray Stafford]

Ray, what is the warranty on the TT40? I bought one from you a couple months back and its broken.

2 years minimum on everything we sell*. Whats the problem with it? (please don't tell me you were beating the apprentice with it...)


*terms and conditions apply!

 

[mfgs]

Seems to be letting water back in when it gets to about 3-4 bar, it wont pump up any more and the water level isn't going down no matter how much you pump.

 

[Ray Stafford]

Seems to be letting water back in when it gets to about 3-4 bar, it wont pump up any more and the water level isn't going down no matter how much you pump.

Ok, will PM you later to organise getting a replacement to you.

Ray

 

[Chalked]

Seems to be letting water back in when it gets to about 3-4 bar, it wont pump up any more and the water level isn't going down no matter how much you pump.

That's called a leak mfgs! :tounge_smile:

Not telling how to suck eggs, but Are you sure your using it properly?

 

[mfgs]

That's called a leak mfgs! :tounge_smile:

Not telling how to suck eggs, but Are you sure your using it properly?

Haha. Yeah I am sure, it has been fine for all the time I have had it until now. I have been regularly testing up to 10 bar with no issues, but not it wont get above 3-4 and the resistance in the pump lever seems to have gone.

 

[mfgs]

Just wanted to update this. Ray PM'd last night to ask how I wanted to get the new pump swapped over. I said I would go into my local branch, I did so today and it was swapped over with no hassle at all. I think the new one is even a TT60, that's what it says on the box but I haven't had a chance to open it yet.

Brilliant service.

 

[northcarr]

Just wanted to update this. Ray PM'd last night to ask how I wanted to get the new pump swapped over. I said I would go into my local branch, I did so today and it was swapped over with no hassle at all. I think the new one is even a TT60, that's what it says on the box but I haven't had a chance to open it yet.

Brilliant service.

I got a boiler from Williams a couple of weeks ago delivered on time very well packaged spot on price and service well done ray I will be back for more .