Search the forum,

Discuss Which spanner ? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
R

Rozie

We need to change the syphon in our ancient porcelain toilet any idea what type of spanner we would need for the back nut. Has anyone used the taptool universal spanner shown on Amazon we were wondering if this would fit.
 
Mmmmmmm I think we need waterpump pliers :D answered my own question cheers.
 
Use: Ridgid Boeing wrench, Snail brand auto wrench or as stated above 12" water pump pliers.
 
12" grips do it for me, also invaluable for delicate jobs such as fire unions :)
 
Hi all thanks so much for your input sorry for some reason replies went into my spam box so didn't realise I had more replies cheers, I enjoy this forum I didn't realise how much plumbing advise we needed.
 
Status
Not open for further replies.

Reply to Which spanner ? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
243
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic nut about the same size as the one going into the cistern but has a different thread. Attached is a photo. Can you advise. Thanks.
Replies
2
Views
183
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
443
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
197
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
231
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock