Search the forum,

Discuss which radiators? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
K

kinghill

hi there

i want to know which make of radiators is better heatline or stelrad?

cheers
 
Would not say stelrad is cheap end of market,would list well above heatline
 
dont know what you are on about oldplumber stelrad are the best you can buy you name a better make if you feel that way
 
Let’s face it, a radiator is a radiator, most are made from thin sheet steel and painted white, check the manufactures output/size, some look better than others. Sterad have a number of styles including the older round top ex Thorn/Myson imperial sizes.
Martin
 
dont know what you are on about oldplumber stelrad are the best you can buy you name a better make if you feel that way

omho, cos they both cost about the same when I get them, I am happy for you to offer your opinion as well cos this is a forum and open to all.:(

I expect to see over on this side of the water come summer when the ferry services start again:D, and continue this thread in the pub:)
 
omho, cos they both cost about the same when I get them, I am happy for you to offer your opinion as well cos this is a forum and open to all.:(

I expect to see over on this side of the water come summer when the ferry services start again:D, and continue this thread in the pub:)

no worrys mate out of interest what make do you prefer?
 
to be honest its realy a case of which design you like best i think all rads are made on similar machines with similar matierials some seem to have a slightly better finish but dont think ive had a problem with rads of any make including those from the sheds for at least 20 years
actually i have more problems with towel rails and designer type rads
 
stelrads have been a round a long time i have found purmo grills are a bit weak
 
Status
Not open for further replies.

Reply to which radiators? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about...
Replies
7
Views
240
Hi, I have an old steel water mains pipe (approx 45mm) that I need to connect to a new pehd water mains (25mm). I can't get at it to create a new...
Replies
2
Views
232
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going...
Replies
1
Views
301
Copper pipes, I think its fair to say, is not what it used to be, the copper is getting thin while the cost is going up. Meanwhile, plastic...
Replies
2
Views
296
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Replies
5
Views
532
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock