Discuss What we all working on this week ? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Anybody lost any hep fittings? 🤣🤣
 

Attachments

  • 16529500733748592048236383614766.jpg
    16529500733748592048236383614766.jpg
    412.7 KB · Views: 21
What was the complaint, pis5 poor flow rate or noise? 😉

Should have been a bit of both. Water was dizzy.

Just a continuation of works from earlier in the week.

Now having to redo whole floor and tidy up pipework under the bath.

Oh and fit a new shower, create new bath panel.

Originally it was vanity basin, wc, enclosure, shower tray out. Patch up tiles and fit new tray, enclosure, toilet and wc.

Now it's new shower, new basin in different location, smaller tray and enclosure, new toilet moved over 18", new towel rail and pipework, re tile floor, tile where bits missing and redo the whole floor.

Onwards and upwards.

Nearly Friday 🍻🍻🍻👍
 
Been servicing this boiler for the last 6 years but recently it's developed a series of problems, it wasn't installed vey well and the builders were not the best and didnt finish off very well , I've upgraded to a Ideal Vogue 32kw with their halo control which is very similar to a nest so far quite impressed , finishing off today upgrading the gas removing a redundant section, fitting a new rad and altering some poorly fitted pipework then cleaning the system.
 

Attachments

  • IMG_20220523_112809293.jpg
    IMG_20220523_112809293.jpg
    299.5 KB · Views: 12
  • IMG_20220523_113937041.jpg
    IMG_20220523_113937041.jpg
    303.6 KB · Views: 12
  • IMG_20220523_091212053.jpg
    IMG_20220523_091212053.jpg
    324.8 KB · Views: 13
  • IMG_20220524_171318447.jpg
    IMG_20220524_171318447.jpg
    459.4 KB · Views: 15
  • IMG_20220523_091206154.jpg
    IMG_20220523_091206154.jpg
    297.9 KB · Views: 15
  • IMG_20220524_171307538.jpg
    IMG_20220524_171307538.jpg
    315.1 KB · Views: 11
  • IMG_20220524_171300113.jpg
    IMG_20220524_171300113.jpg
    391.8 KB · Views: 11
  • IMG_20220524_171457909.jpg
    IMG_20220524_171457909.jpg
    264.5 KB · Views: 15
Hmmmm
 

Attachments

  • 14DA2F49-6811-4C91-AE4E-B65756762514.jpeg
    14DA2F49-6811-4C91-AE4E-B65756762514.jpeg
    568.7 KB · Views: 19
  • FC637B92-FC8A-4B07-BB6F-568FD6E5A27C.jpeg
    FC637B92-FC8A-4B07-BB6F-568FD6E5A27C.jpeg
    446.9 KB · Views: 23
Why ???? FFS seen it all now its leaking from the inner seals I'd say 🤣🤣 kop

Zero fall on the flue and seals fecked funny part is it’s been serviced every year this year was a good lad and flagged it up for repair lucky
 

Reply to What we all working on this week ? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi guys....we have an old Astracast sink top....I think its a composite sink....has a big single bowl. My wife thinks it looks scruffy....looks...
Replies
2
Views
224
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
442
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
219
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Replies
5
Views
555

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock