Discuss What type of tap connection is this? in the USA area at PlumbersForums.net

Messages
12
Hi,

I have the attached Primo basin walk mixer from Victorian plumbing but the tap spout is a bit too short.

Can anyone tell me where I can get a chrome tap spout roughly 190-200mm long, that fits the connection I have, or even the name of the type of connection.

Its a type of connection where you push the tap on and tighten with two grub screws.

I can’t find a replacement anywhere.

any help would be appreciated.
Thanks.
ben.
 

Attachments

  • 480B72BD-CBDF-4CC4-855B-15710E32F8AB.jpeg
    480B72BD-CBDF-4CC4-855B-15710E32F8AB.jpeg
    80.3 KB · Views: 12
  • C1406F0B-E0CF-4EE1-B04A-1D3E632172D5.jpeg
    C1406F0B-E0CF-4EE1-B04A-1D3E632172D5.jpeg
    122.9 KB · Views: 13
  • EECFD06C-F44E-442F-ABA6-4F3402536682.jpeg
    EECFD06C-F44E-442F-ABA6-4F3402536682.jpeg
    46.4 KB · Views: 11
  • 7E9875AF-E6F4-4779-9F48-F25CF346C372.jpeg
    7E9875AF-E6F4-4779-9F48-F25CF346C372.jpeg
    44 KB · Views: 12
  • A2B877F9-A70C-4C24-906C-FAF469A22459.jpeg
    A2B877F9-A70C-4C24-906C-FAF469A22459.jpeg
    45.8 KB · Views: 12
Surely your best bet is to go back to who you bought it from?
I’ve done all that. It’s from Victorian plumbing. There phone lines are off due to Covid, and whoever I am speaking to cannot tell me what the type of connection is or offer me an Alternative.
which is why I’m asking you pros..
 
It's a common style, but sizes will vary between manufacturers.
Victorian may be able to get a longer one as they know who manufactured it.
It's possibly only made for them.
 
It's a common style, but sizes will vary between manufacturers.
Victorian may be able to get a longer one as they know who manufactured it.
It's possibly only made for them.
I don’t know if it’s due to Covid and all the tech guys are at home but they are really
Not helpful.
Any idea what the type of connection is called so I can just search for one on the web?
the only ones I can find are the screw in type?
[automerge]1600283771[/automerge]
I have this one.
 
May I ask why you need it longer ? As 8” is around normal for a basin
 
I hate to ask what’s changed since it was all tiled in, or to mention the importance of forward planning...

Anyway.

It is generally know as a spigot connection, quite common as Snowhead says.

I’ve fitted quite a few from Dornbracht and Hansgrohe, but the size is critical as the water tightness relies entirely on a couple of o-rings fitting precisely.

Both of the above two manufacturers have fantastic dimensional drawings for their products so if you use a micrometer to size up what you have you may be able to find one that suits.

Try emailing technical at Victoria and someone should be able to help, or at least give you the manufacturer details so you could pursue that line of enquiry.
 
I don’t know if it’s due to Covid and all the tech guys are at home but they are really
Not helpful.
Any idea what the type of connection is called so I can just search for one on the web?
the only ones I can find are the screw in type?
[automerge]1600283771[/automerge]

I have this one.
according to site that one as the other protrudes 200mm
 
I think the dimension given is from the back of the fitting inside the wall, so a fair bit shorter projection from wall.

Any luck with sizing up the spigot?
 

Reply to What type of tap connection is this? in the USA area at PlumbersForums.net

Similar plumbing topics

Hi. Just want to make sure I'm not gonna wreck something. I need to connect the spout to the mixer tap, put it's very difficult to push down into...
Replies
8
Views
843
Does anyone know where I can get one of these or even know what there called typed in every flexi tap connector I can think of but nothing’s like...
Replies
2
Views
1K
C
Hi I have a sink that has the basin plus another smaller basin next to it, think it is a 1/4 of the size of the main basin. The unit comes up...
Replies
2
Views
924
Hi I am not sure whether I have posted correctly earlier today, if so please forgive me as I am trying again just in case. I have a sink that...
Replies
2
Views
736
My Franke Eiger mixer tap started leaking from where the spout joins the body. I took the spout off, the o rings looked ok so I put a bit of...
Replies
5
Views
1K
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock