Search the forum,

What type of diaphragm?

Post new thread

Discuss What type of diaphragm? in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

R

Rob1988

Messages
1
Can anyone tell me what type of diaphragm this is and where I could get one please? The cistern was taking ages to fill up. I have tried Plumbers merchants and screwfix but they didnt have the same type.


Also, on my other toilet, that was taking forever to fill up aswell so I removed the little arm at the top of the inlet valve and it fills a lot quicker now. Can I leave that off?

Thanks!
 

Attachments

  • 20221021_150606.jpg
    20221021_150606.jpg
    221 KB · Views: 12
  • 20221021_150251.jpg
    20221021_150251.jpg
    145.5 KB · Views: 13
  • 20221021_132616.jpg
    20221021_132616.jpg
    320.9 KB · Views: 12
It could be one of several, not one I’ve seen, could be ideal standard/armitage. Are there any markings on it, or so you know if your toilet is branded? Failing that you could try toilet spares. As for the other toilet sounds like a siamp valve and no I wouldn’t recommend leaving the arm off as it might not stop filling.
 

Reply to What type of diaphragm? in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

S
Using coil to clear pipe leading to gutter
Hi, I seemed to have a blockage in kitchen sink. A plumber came and cleared all the pipework that is visible inside my home (there was debris and pebbles!) We saw that the pipe that takes water down the gutter was visibly full to the top. He said he will return with a coil to push through...
Replies
2
Views
114
Sonya K
S
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
375
Chuck
C
M
Central heating losing pressure all the time
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
2
Views
236
PSxxxxxx
P
dreikher
Hole in copper pipe, solder under floor, T coupling & protection
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
213
dreikher
dreikher
N
Oversize kitchen sink top/drainer buying one.
Hi guys....we have an old Astracast sink top....I think its a composite sink....has a big single bowl. My wife thinks it looks scruffy....looks ok to me.....sound but the bowl has seen a lot of work. So she wants a new one...Astracast it seems are no more. The problem is its size.....looked...
Replies
2
Views
169
turnpin
turnpin
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tiling Advice
Tilers Forums UK
UK Tiling Forums
Tilers Forum
Tiling Advice
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock