Search the forum,

What reducer do I need?

Post new thread

Discuss What reducer do I need? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
And a 35 mm coupling/ adapter if it's imperial
 
Harvest Fields said:
Just out of curiosity. What are you connecting?
Click to expand...

Am fitting a Fernox TR1 into the return line, 35mm, to the boiler. The TR1 is the 28MM version. On boiler replacement, next year, will correct directly into the boiler 28mm pipework but for now want to fit it to current boiler line.
 
I would use a spyro 35mm from city plumbing. Put the 28mm in when you fit the boiler.
 
Bogart said:
Not sure why I need a 35mm to 35mm or 35mm to 1 and qrtr
Click to expand...

Because the reducer you have is a fitting reducer so it's the same dia as the 35mm pipe so you need a coupling

TBH it sounds like you might need the help of a heating engy
 
Yep that will do also
 
Status
Not open for further replies.

Reply to What reducer do I need? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

B
Unvented hotwater cylinder
Fitted unvented hotwater cylinder building control looking forms signed it off job was in england i am qualified northern ireland send out a form to fill in what do u need to sign off in england as building control said they dont give out forms like they do in northern ireland
Replies
4
Views
204
ShaunCorbs
ShaunCorbs
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
137
Lou
Lou
K
Running copper pipework above / across a Gas boiler?
Hi all, this is probably a daft question but I need to run my cold feed from one side of my wall mounted boiler to the other. Running it beneath the boiler is difficult with lots of obstacles, is it okay if I run soldered copper over / across the top of the boiler? It'll be about 4" off the top...
Replies
1
Views
48
ShaunCorbs
ShaunCorbs
M
Viessmann external flue run conundrum
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
212
mutley racers
M
D
Extending outdoor tap and drain
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to run the water line underneath. There are existing drain (and who knows what) pipes running along the same wall so I'm nervous about digging too far...
Replies
6
Views
231
DIwhYdidIstartThis
D
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tiling Tools
Electrical Blog
Tile Advice
Plumbers' Talk
Tilers Forums UK
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock