Currently reading:
Water Tank Corrosion

Discuss Water Tank Corrosion in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
G

Gosportdave

Hi
Can anyone advise how to remove the corrosion on the temperature and relief valve on the outside of my tank.
There is a very slight drip occasionally but not much.

I have attached a photo.
Thanks 20170717_180736.jpg 20170717_180745.jpg
 
A dripping T & P valves indicates a potential problem. This is an essential safety device that should be looked at by a G3 certified plumber. Cleaning it will possibly make any leak worse. It needs testing, reinstalling or replacing if necessary.
 
Time for a service call get your G3 egineer to swap that dont mess about with it as you could make the problem worse cheers kop
 
Status
Not open for further replies.

Reply to Water Tank Corrosion in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock