Search the forum,

Discuss Water preasure in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
U

Unregistered

Have just been given a water filter that fits onto the cold tap, when I tried it out there was only a trickle coming out from the filter so after reading the instructions it seems that its no good to me as the PSI has to be between 60-100 and sadly mine is only 10 PSI . Is there any other way I could get around this problem?

Yours truly Chummy
 
Please register with us to receive additional answers to your problem.
 
Status
Not open for further replies.

Reply to Water preasure in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
401
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason...
Replies
3
Views
303
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
183
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16...
Replies
0
Views
221
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...
Replies
9
Views
262
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock