Discuss Water doesn't fill under cistern lid in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
11
Hey lads,

Trying to fix a toilet for a lady friend (to make a good impression, you know) but having a hard time. It doesn't flush, and the only it does is when I use the hose from the shower and fill up the tank with water. Once it gets to a certain point, it flushes okay, but obviously it isn't practical to keep doing this when she wants to use it!

I've compared it to another toilet in her house, and the water level is around the same on both, only this one doesn't flush.

Any help is so hugely appreciated.
 
Got a piccy

This was taken right after a flush:

246vup0.png
 
Bit with the green top will need removing entirely. Flip it over and there will likely be shreds of a plastic diaphragm either replace the diaphragm or replace the whole siphon, as si above says make it A two part one so you don’t have to dismantle the whole toilet again in the future
 

Reply to Water doesn't fill under cistern lid in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
465
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16...
Replies
0
Views
241
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
Replies
6
Views
327
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock