D
Devil
O.K I have an issue with this boiler and its driving me mad, it is as follows:
Boiler will heat up the thermal store but will not provide any hot water to the taps. You do get a short burst of hot at first but then it goes tepid at best, the heat exchanger is hot at first but then runs cold, despite the store being hot.
I have changed the blending valve , still nothing doing, dhw pump is fine as I put a new one on just to make sure that wasn't the issue.
Have been told by Warmflow that it could possibly be the flexible holes that come from the main store. Any suggestion from someone who has a bit more experience with this make would be greatly apprieciated.
Boiler will heat up the thermal store but will not provide any hot water to the taps. You do get a short burst of hot at first but then it goes tepid at best, the heat exchanger is hot at first but then runs cold, despite the store being hot.
I have changed the blending valve , still nothing doing, dhw pump is fine as I put a new one on just to make sure that wasn't the issue.
Have been told by Warmflow that it could possibly be the flexible holes that come from the main store. Any suggestion from someone who has a bit more experience with this make would be greatly apprieciated.