Discuss Viessman Biomass Training in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

CES

Plumbers Arms member
Plumber
Gas Engineer
Messages
2,475
I'm going down to Telford on the Viessmann Vitoligno course on Tuesday. Anybody been? or going?
 
No, but wouldn't mind some feedback on it ces if you don't mind? I've done the grant spira course and hetas at windhager.

Whats it costing you and how longs the course, is it a viesmannn accreditation course?
 
It's a one day product course, probably full of sales pitch but its free and a nice hotel paid for by Viessmann too! I'll let you know how it goes.
 
Sounds like a great deal, are you in with them well anyway for their other products?
 
went on there solar course in 04, good crack but all they talked about was there boilers and got this as a freeby lol. also go an see the ironbridge if you get time. its a lot smaller than i thought
 

Attachments

  • image.jpg
    image.jpg
    72.1 KB · Views: 99
Sounds like a great deal, are you in with them well anyway for their other products?

No, it was a deal organised through a Merchant that has opened a branch near me. UFW
 
Sorry for the delay in getting back. The course was ok. It was a basic product run through on the Vitoligno 100 A wood pellet boiler.
They have a working unit within their training department which we stripped down as if we were carrying out a service on it. The trainer gave a brief run through of each part and what to expect when servicing them. They also advised on the different methods of storing and transporting the wood pellets from the hopper to the boiler (they had a vacuum delivery type installed).
While we were there we also got a walk through the offices and shown various products which they offer and some they are developing. In all it was very informative and judging by some of the products available I would consider fitting Viessmann in the future.
The only downside was I felt that the Vitoligno would not be something I could fit in a normal domestic environment due to the size of the installation required. It may be suited to others who fit in rural areas though.

Hope this helps.
 
Status
Not open for further replies.

Reply to Viessman Biomass Training in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Copper pipes, I think its fair to say, is not what it used to be, the copper is getting thin while the cost is going up. Meanwhile, plastic...
Replies
2
Views
331
Hi all Noticed bad smell in my drain out side put my hand down and it unclogged it for now however I checked my sewer drain and after flushing my...
Replies
3
Views
587
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to...
Replies
6
Views
295
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
Replies
6
Views
334
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic...
Replies
2
Views
239
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock