Search the forum,

Valid CSC Card

Post new thread
  • Thread starter Young Gunner
  • Start date
  • Replies 2
  • Views 967

Discuss Valid CSC Card in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Y

Young Gunner

Not too sure if this is the right place to post this but...

After going to the official CSCS website to find out which CSCS card I could get it turns out I need an NVQ2 (which I don't have yet) to apply for one. If there any way of getting a CSCS which is relevant but you don't need an NVQ i.e. labourer?? Would any firms hire you as a plumbers mate if you have a labourers CSCS.

Thanks in advance.
 
OMG I took a second look (didn't go through their advised channels) and saw there's a trainee card aswell.

Thanks for that mate.

Case closed.
 
Status
Not open for further replies.

Reply to Valid CSC Card in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

F
Mystery Mira Elite QT Leak
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
234
Firefox
F
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
135
Lou
Lou
M
Viessmann external flue run conundrum
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
211
mutley racers
M
S
Using coil to clear pipe leading to gutter
Hi, I seemed to have a blockage in kitchen sink. A plumber came and cleared all the pipework that is visible inside my home (there was debris and pebbles!) We saw that the pipe that takes water down the gutter was visibly full to the top. He said he will return with a coil to push through...
Replies
1
Views
64
Chuck
C
C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
201
SimonG
SimonG
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tiling Forum
Tiling Advice
Electrical Forum
Electrical News
Electrician Talk Forum
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock