Search the forum,

Discuss Vaillant ecotec 624 slowly losing pressure in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
22
Hi All

My Vaillant 624 has been slowly losing pressure over 2 weeks. I filled up to 1.5 bars. when the heating turned on it increased to 2.0 bars. I then noticed over a period of 2 weeks or so it has slowly dropped to 0.9 bars.

There is no obvious leaks around the radiator pipes. I bled all the radiators and they are working fine.

The copper pipe outside doesnt seem to have any water dripping.

What could be the cause of this?

Thanks for your opinions.
 
If there is no obvious leak neither damp patches on ceilings or walls then it's time to hire a certified plumber engineer.
Have an engineer pressure up the system to see if its the system or the boiler, unless you feel comfortable enough to do it on your own. Then isolate the boiler overnight on the flow and return pipes without a demand and see if the pressure drops, if yes its most likely the boiler itself, if not then its the system.

How old is the boiler ? When was the last boiler service?
 
Hi. Thanks.

It's vaillant ecotec 624 system boiler. I can fill up the pressure to 1.4 and see what happens. Not sure how to isolate it on flow and returns so prob will get someone to have a look? Or can it be done by hut switching off heating and water?
 
Best to get someone in tbh
 
As above, you may damage something and it will cost in the end much more.
 
Status
Not open for further replies.

Reply to Vaillant ecotec 624 slowly losing pressure in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
252
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
339
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
231
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
243
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
472
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock