Discuss Vaillant ecotec 624 loses pressure slowly in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
22
Hi All

My Vaillant 624 has been slowly losing pressure over 2 weeks. I filled up to 1.5 bars. when the heating turned on it increased to 2.0 bars. I then noticed over a perios of 2 weeks or so it has slowly dropped to 0.9 bars.

There is no obvious leaks around the radiator pipes. I bled all the radiators and they are working fine.

The copper pipe outside doesnt seem to have any water dripping.

What could be the cause of this?

Thanks for your opinions.
 
Status
Not open for further replies.

Reply to Vaillant ecotec 624 loses pressure slowly in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up...
Replies
2
Views
262
PSxxxxxx
P
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason...
Replies
3
Views
313
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
419
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about...
Replies
7
Views
246
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
Replies
6
Views
300

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock