Search the forum,

Vaillant Boiler and Random Switch!! Help!!

Post new thread

Discuss Vaillant Boiler and Random Switch!! Help!! in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
N

Nickmorris6

Messages
9
Hello, I have just bought a new house and there is a boiler and switch (photos attached) that I have no idea how to use!!

i've been on YouTube, read the instructions and all that happens is the radiators warm up, get hot and then completely turn off but the flat still hasn't actually warmed up to a temperature we want!

does anyone know what the switch is next to the boiler spur?

How do I put this boiler on a timed setting? Or just leave it on all the time?

thanks in advance.
 

Attachments

  • IMG_6426.jpg
    IMG_6426.jpg
    88.2 KB · Views: 13
  • IMG_6425.jpg
    IMG_6425.jpg
    104.3 KB · Views: 16
Last edited:
There a room stat somewhere well there should be as the receiver is pic two
 
All sorted ?
 
Status
Not open for further replies.

Reply to Vaillant Boiler and Random Switch!! Help!! in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

B
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
261
oz-plumber
O
F
Mystery Mira Elite QT Leak
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
244
Firefox
F
F
  • Question
No Hot water, Fixed and Broken Again Ideal Logic 24
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
150
Lou
Lou
M
Central heating losing pressure all the time
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
2
Views
230
PSxxxxxx
P
A
Emergency Stop Buttons in Boiler Rooms
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
284
oz-plumber
O
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Contractor Advice Forum
Tiling Tools for Beginners
Plumbers' Talk
Contractor Forum
Tiling Tools
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock