Search the forum,

Discuss Underfloor heating installation course in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

Robert Tyrrell

Gas Engineer
Messages
701
Does anyone know of a good course for UFH? I have been offered a bit of work where I am installing a new boiler (Easy enough) and they want underfloor heating installed in the new conservatory they're having built at the same time.
Ideally I would like to complete the course within the next month.

Cheers m'dears :)
 
uponor do one, details on their site.
 
Status
Not open for further replies.

Reply to Underfloor heating installation course in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, I have I blend valve from Nu-Heat ( they bought it from Reliance, as per attached spec). I have dismantled the valve now 3 times and...
Replies
0
Views
357
I'm attending a wet underfloor heating system, it's an old one ..No flow meters, just adjustable valves on the returns with conventional...
Replies
3
Views
524
Hi, I have an 1904 redbrick 2,500 square feet house. We have UFH on every floor. 3 Floors House is reasonably well insulated but far from...
Replies
1
Views
443
Hi there, I'm considering having my heating system controlled by Honeywell Evohome. I have a question about the underfloor heating controller...
Replies
4
Views
876
I have been facing central heating low pressure on unvented hot water RM Cylinders but can't see any leak on the PRV, expansion vessels and...
Replies
2
Views
486
losing pressure
L
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock